Flux-cored wire, high-alloyed, austenitic stainless

Características:
Rutile fl ux-cored wire of T 19 9 L P / E308LT1 type designed for welding 1.4307 / 304L type stainless steels with good corrosion resistance under moderately severe conditions, e.g. in oxidizing acids and cold or dilute reducing acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4541 / 321, 1.4878 / 321H and 1.4550 / 347, but for service temperatures above 350ºC, a niobium-stabilized wire such as FOXcore 347-T1 would be required. The scaling temperature is approximately 850ºC in air. Designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical-up and overhead positions. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –196ºC to 350ºC. For fl at and horizontal welding positions, FOXcore 308L-T0 or FOXcore 308L-T0 DG may be preferred.